Henkel Henkel Edge Edge hot melt adhesive KS3926 KS3926 is a hot melt adhesive sealing adhesives, has good heat resistance, high bond strength, wide operating range of features. For a variety of automatic edge banding machine edge banding. Henkel is widely used in hot melt adhesive sealing KS3926 MDF, particleboard and other sheet metal and PVC, thin veneer, melamine paper while waiting sapwood fit. All materials Henkel hot melt edge KS3926 comply FDA (US Food and Drug Association) regulations 21CFR175.105 "binder." Henkel hot melt adhesive sealing roller KS3926 Recommended Operating Conditions Temperature: 180-210 oC feed rate: ≥10 m / min plastic tank temperature: 170-200oC substrate moisture content: 8--10% Pressure: 3 - 5 Kg / cm2 substrate temperature: ≥15oC Henkel hot melt edge KS3926 operating tips should always measure the actual temperature of the hot melt adhesive on the rollers with thermometer?. ? In order to avoid thermal degradation, the working gap bath temperature should be appropriately reduced. ? Roller temperature is too low will result in low adhesion. Henkel hot melt edge KS3926 stored below 40o C must be stored in dry, cool place, storage period of one year. Henkel hot melt edge KS3926 precautions? Do not mix with other adhesives. ? Hot melt adhesive tank must be tightly closed to prevent debris falling into affect adhesive performance. ? Due to the use of hot melt adhesive to be heated, the need to wear personal protective equipment is recommended? "Advanced - by using" recycled. Henkel hot melt edge KS3926 Physical Characteristics Appearance: Amber particulate solid content: 100% Viscosity: @ 200oC: about 68,000cps @ 180oC: 127,000cps softening point: about 100 oC, Universal Law Standard Packaging: 25Kg / bag Henkel Before using this product, please read the hot melt adhesive sealing KS3926 "Precautions" and product safety data sheet Henkel hot melt edge KS3926